Installing TempleOS

Burn a CD with software that supports ISO files. Then, boot it. It's a live CD, so you can look around with or without installing. Dual booting with another operating system is the best way to use TempleOS. I only use it in a virtual machine because it won't boot natively on my machine, though. For native dual booting, you need a partition for TempleOS. Windows often comes with a restore disk that does not allow repartitioning. I recommend connecting a spare additional hard drive and using the BIOS to select which drive to boot. The ::/Misc/OSInstall.HC script will automate much of this. It runs if you boot the CD/DVD-ROM. See Boot.DD for an overview of booting. See Requirements for supported hardware. Two TempleOS partitions are highly recommended, so you can boot to a back-up and fix the primary when you work on it. Odds are, you only need a couple gigabytes for your TempleOS partitions. 1) Mount() use if the drive is partitioned. This command mounts a drive making it accessible. For simplicity, sel 'C' as the first drive letter for your hard drive. The first partition will be 'C', second, 'D', etc. TempleOS needs 3 numbers to utilize a hard drive -- base0, base1, and unit. When you enter a hexadecimal number, do it like in C with a 0x prefix. If the probe was successful, you can just enter the number in the probe box instead of base0. DskPrt('C') use if drive is not partitioned This will perform a special Mount() automatically. WARNING: This command erases everything on a hard drive. It repartitions a whole drive and formats the partitions. This command should be skipped if you already have your hard drive partitioned. WARNING: This command doesn't play well with other operating systems. You'll need to do a BootMHDZero() to restore your drive to a state where other operating systems can partition it. 2) Fmt('D',TRUE,FALSE,FSt_FAT32) This command formats a drive with FAT32 or the RedSea file system type. Use the drive letter of the partition in place of 'D'. WARNING: If you are upgrading, be sure not to lose the file, /0000Boot/OldMBR .BIN.C. 3) CopyTree("T:/","D:/") This command is used to copy files onto a hard drive partition from the CD/DVD. Use the drive letter of the partition in place of 'D'. 4) BootHDIns('D') This command recompiles the source code on a drive and writes to the drive's boot record. You'll need to reenter the Mount information so it can be stored in the kernel. 5) Use Linux's Grub or TempleOS' BootMHDIns('D') The BootMHDIns() command places a boot loader on a drive. It saves the old master boot record to /0000Boot/OldMBR.BIN.C and replaces it. When you boot, you will have the option of booting the old master boot record. This command can be skipped if you already have a boot loader. Be sure not to lose the copy of the old boot record, like if you reformat the drive. Delete /0000Boot/OldMBR.BIN.C if you want to get a fresh copy of a mbr, like if installing from your own custom CD containing it's own /0000Boot/OldMBR.BIN .C onto a system with a non-TempleOS boot loader. If you have anti-virus software, it might object to having a different master boot record. * "Windows" is a trademark owned by MicroSoft Corp. * "Linux" is a trademark owned by Linus Torvalds.